Contact
Tel: 18037961302
Sales hot line ( 24 hours  service): 18037961302

E-Mail: firstfurnace@gmail.com

whatsapp:+8618037961302

Adress: Luoxin Industrial Park, Luoyang, Henan
  • Products
  • Gear hardening machine

    Large diameter steel pipe quen

    Piston rod quenching and tempe

    Hand-held induction heater

    Grinding rod quenching and tem

    Induction forging machine

    induction heating machine 

    Induction heater

    High frequency induction heate

    Super audio induction heating

    Super audio induction heating

    Guideway quenching integrated

    Quenching equipment for machin

    Round steel end heating furnac

    Steel pipe heat treatment prod

    Square steel quenching and tem

    Sucker rod quenching and tempe

    Thickened petroleum steel pipe

    Round steel quenching and temp

    Steel pipe quenching and tempe

    Steel plate quenching and temp

    Induction Hardening Machine&nb

    Flywheel ring gear high freque

    Oil drill pipe quenching and t

    Iron induction furnace

    Aluminum melting furnace

    Copper melting furnace

    Small steel melting furnace

    Electric furnace technical information(技术)
        

    Lateral strip of magnetic field induction heating annealing treatment parameters

    Transverse magnetic field induction heating annealing treatment is mainly used for recrystallization annealing of cold-rolled low-carbon steel strips and annealing to eliminate time-dependent changes. The purpose of recrystallization annealing is mainly to improve the plasticity and toughness of the steel strip. The purpose of annealing to eliminate the phenomenon of strain aging is to maintain the plasticity and stability of the steel strip.

    There are two traditional annealing treatment methods for low carbon steel strip. One is to anneal the whole coil of steel strip in a protective atmosphere hood furnace, and the annealing cycle of each furnace is 16~ 24h; the other is to uncoil annealing in a protective atmosphere continuous annealing furnace, and the operation time is Short, but the steel strip has strain aging phenomenon after annealing. In addition, these two annealing processes have the disadvantages of high energy consumption and low thermal efficiency.

    In the 1970s, foreign researches used the transverse magnetic field induction heating method to anneal cold-rolled low-carbon steel strip, which achieved certain results and was used in production practice. Table 9-3 shows the power supply and annealing process parameters of some cold-rolled low-carbon steel strip transverse magnetic field induction heating production lines.

    Table 9-3 Steel strip transverse magnetic field induction heating power supply and annealing process parameters

    Power

    /kw

    Power frequency

    /kHz

    Heating steel strip size (thickness X width) /mm

    Heating temperature

    /°c

    transfer speed

    / m, min_ 1

    Sensor size

    (Long X turns)

    100

    8

    (0.20-0.35)X(180-360)

    300

    30

    2mX4

    500

    10

    (0.20-0.35)X(240-360)

    320

    100

    6mX12

    1000

    1

    (0. 20-1. 00) X 100()

    200 — 300

    <60

    4mX8

    1500

    1

    (0.20 〜0.60) X(300 〜800)

    800

    <120

    0.6mX 1

    3000

    1

    (0.20-0.60)X(300-800)

    800

    <120

    0.6mX 2

     

    The 200~ 320°C annealing treatment process listed in Table 9-3 is mainly used to eliminate the strain aging phenomenon of thin steel strips. When the cold-rolled thin steel strip is subjected to rapid continuous annealing treatment, due to insufficient recovery recrystallization annealing time, the resulting annealed structure is not very stable. After being maintained at room temperature, natural aging (ie strain aging) will occur under the action of its internal stress. )Phenomenon. The occurrence of strain aging will reduce the plasticity of the steel strip and increase its brittleness, and in severe cases will cause the steel strip to brittle fracture. In order to reduce the phenomenon of strain aging, a treatment method of 200~ 300°C low temperature annealing and rapid cooling is adopted .

    https://songdaokeji.cn/category/products/induction-heating-furnace/induction-heating-furnace-induction-heating-furnace

    https://songdaokeji.cn/category/blog/induction-heating-furnace-related-information

    firstfurnace@gmil.com

    Telephone:+86 15038554363

     


    Copyright© 2007-2013 songdao Electric furnace manufacturing Co,.Ltd All Rights Reserved
    Tel:18037961302 Sales hot line ( 24 hours service): 18037961302
    E-Mail:firstfurnace@gmail.com
    Adress: Luoxin Industrial Park, Luoyang, Henan