Tel: 18037961302
Sales hot line ( 24 hours  service): 18037961302



Adress: Luoxin Industrial Park, Luoyang, Henan
  • Products
  • 0.25T Intermediate Frequency F

    0.5T Intermediate Frequency Fu

    Medium Frequency Furnace

    2T Induction Melting Furnace

    1T Induction Melting Furnace

    500kg Induction Melting Furnac

    250kg Induction Melting Furnac

    Induction Melting Furnace

    3 T Induction Melting Furnace

    5T Induction Melting Furnace

    1T One Belt Two Intermediate F

    5T One Belt Two Intermediate F

    3T One Belt Two Intermediate F

    2T One Belt Two Intermediate F

    5T Parallel Intermediate Frequ

    5T Intermediate Frequency Furn

    5T Series Intermediate Frequen

    3T Series Intermediate Frequen

    2T Series Intermediate Frequen

    1T Series Intermediate Frequen

    0.5T Series Intermediate Frequ

    0.25T Series Intermediate Freq

    1T Parallel Intermediate Frequ

    2T Parallel Intermediate Frequ

    0.5T Parallel Intermediate Fre

    0.25T Parallel Intermediate Fr

    Parallel Intermediate Frequenc

    3T Intermediate Frequency Furn

    Industrial electric furnace technical information

    If you want the horse to run fast, you must let the horse graze. Similarly, if you want to use the induction melting furnace well and have a longer service life, you must also do daily maintenance and maintenance. Not only can it greatly reduce the occurrence of failures, but also save high maintenance costs. It can also greatly extend the service life of the equipment.

    1. Regularly check and clean the radiator to maintain high cooling fruit. If necessary, use acid with added corrosion inhibitor for acid pickling. It is better to check the water cooling system of the induction melting furnace for water blocking and leakage and whether the water pressure relay is sensitive. It is recommended that the temperature difference of the imported water is generally greater than 35 < C.

    2. Check the condition of the induction coil and whether there is water leakage; check the wires and switches for damage; check and clean the water tank of the induction melting furnace, check the drain valve and remove the sewage to prevent scaling.

    3. Clean the oil and dust on each electrical component, blow it off with a fan or with a tiger; check whether the wiring screws of the induction melting furnace are tightened, and check whether the thyristors, electrical buses, transformers and various line segments are overheated. 


    Copyright© 2007-2013 songdao Electric furnace manufacturing Co,.Ltd All Rights Reserved
    Tel:18037961302 Sales hot line ( 24 hours service): 18037961302
    Adress: Luoxin Industrial Park, Luoyang, Henan