Contact
Tel: 18037961302
Sales hot line ( 24 hours  service): 18037961302

E-Mail: firstfurnace@gmail.com

whatsapp:+8618037961302

Adress: Luoxin Industrial Park, Luoyang, Henan
  • Products
  • 0.5T intermediate frequency me

    Medium Frequency Induction Mel

    250kg induction melting f

    500kg medium frequency in

    5T Medium Frequency Induction

     5T Induction Meltin

     500kg induction mel

    induction melting furnace

    3T medium frequency induction

    2T frequency induction me

    1T Medium Frequency Induction

    Bar heating furnace

    300KG electromagnetic melting

    250 KG electromagnet

    200 KG electromagnet

    silver melting furnace

    Brass melting Furnace

    atomization milling equipment

    Platinum melting furnace

    Selection of common spare part

    Medium frequency copper meltin

    scrap copper melting furnace

    800kg electromagnetic

    600KG electromagnetic copper m

    500KG electromagnetic

    400KG electromagnetic copper m

    350KG electromagnetic copper m

    300KG electromagnetic copper m

    Industrial electric furnace technical information
        

    The composition of the aluminum shell induction melting furnace

    Brief introduction of aluminum shell induction melting furnace: The furnace body is composed of four main parts: furnace shell, induction coil, furnace lining and tilting speed reducer. The furnace shell is made of non-magnetic material, and the induction coil is made of rectangular hollow copper with a wall thickness of 2.7 mm. A spiral cylinder made of a tube, through which cooling water is passed during the smelting. The coil leads out the copper row and communicates with the water-cooled cable. The furnace lining is close to the induction coil and is sintered by quartz sand. The tilting of the furnace body is directly rotated by the tilting gear box. The tilting gearbox is a two-stage worm-driven shifting gear with good self-locking and stable and reliable rotation. In case of emergency breakpoint, the furnace can be manually tilted to avoid danger. The furnace can be used to control the furnace of the two furnaces. The control is selected, and the switch box with the four-core rubber wire enables the operator to stand tilting at the appropriate position and reset to perform jog control.

    Copyright© 2007-2013 songdao Electric furnace manufacturing Co,.Ltd All Rights Reserved
    Tel:18037961302 Sales hot line ( 24 hours service): 18037961302
    E-Mail:firstfurnace@gmail.com
    Adress: Luoxin Industrial Park, Luoyang, Henan