Tel: 18037961302
Sales hot line ( 24 hours  service): 18037961302



Adress: Luoxin Industrial Park, Luoyang, Henan
  • Products
  • 0.5T intermediate frequency me

    Medium Frequency Induction Mel

    250kg induction melting f

    500kg medium frequency in

    5T Medium Frequency Induction

     5T Induction Meltin

     500kg induction mel

    induction melting furnace

    3T medium frequency induction

    2T frequency induction me

    1T Medium Frequency Induction

    Bar heating furnace

    300KG electromagnetic melting

    250 KG electromagnet

    200 KG electromagnet

    silver melting furnace

    Brass melting Furnace

    atomization milling equipment

    Platinum melting furnace

    Selection of common spare part

    Medium frequency copper meltin

    scrap copper melting furnace

    800kg electromagnetic

    600KG electromagnetic copper m

    500KG electromagnetic

    400KG electromagnetic copper m

    350KG electromagnetic copper m

    300KG electromagnetic copper m

    Electromagnetic copper melting furnace

    product description


    Electromagnetic copper melting furnaces have many irreplaceable advantages over traditional conductive heating; for example: more efficient, more energy efficient, safer, more comfortable and environmentally friendly . Electromagnetic copper melting furnace is a metal melting equipment developed by our company for use below 1000 <C. Its functions have the following characteristics:

    1. Energy saving and saving: The average copper consumption is 0.4~0.5 degrees/KG copper, which is more than 30% less than traditional stoves;

    2, efficient use: 1 hour 600 < rising temperature, heating speed is super fast, lasting constant temperature;

    3, environmental protection and low carbon: in line with national energy conservation and emission reduction policies, no dust, no fumes, no harmful emissions;

    4. Safe and stable: Independently research and develop 32-bit CPU technology, with intelligent protection such as leakage, copper leakage, overflow and power failure;

    5, copper    Slag   Less: electromagnetic eddy current induction heating, no heating dead angle, high raw material utilization rate;

    6, the life extension: 栫椁 heat is even, the temperature difference is small, the life expectancy is extended by 50%;

    7. Precise temperature control: instantaneous reaction of eddy current, self-heating, no hysteresis of traditional heating;

    1. Applicable industries:

    Copper die-casting factory, copper ingot production plant, scrap copper melting industry, casting factory, automobile and motorcycle parts production, mobile phone casing, lamps, rice cooker heating plate manufacturer

    2. Product introduction:

    Electromagnetic copper melting furnace is an energy-saving electromagnetic melting copper equipment that replaces traditional resistive, coal-fired, fuel-fired, medium-frequency furnaces. With the rise of cost materials, all walks of life are facing fierce market competition, and the increase in electricity bills is even more The industry is getting worse. The emergence of electromagnetic copper melting furnace solves various problems in the metallurgical industry. It has the advantages of intelligence, security, money saving, environmental protection and other national support, and is sought after by the metallurgical industry.

    3. Product classification: 800 kg electromagnetic copper melting furnace

    Model: SD-AI-800KG

    Melting material: silicon carbide graphite crucible

    栫椁Material: Copper alloy

    栫椁 Capacity: 800KG

    Rated power: 160KW

    Melt capacity / ton: 350 kWh / ton

    Insulation power consumption / hour: 3.5 degrees electricity / hour

    Melting speed kg / hour: 400KG / hour

    4, heating principle:

    The electromagnetic melting furnace converts electrical energy into thermal energy by an electromagnetic induction heating controller using an electromagnetic induction heating principle. First, the internal alternating current is converted into direct current through an internal rectification and filtering circuit, and then the direct current is converted into high frequency magnetic energy through a control circuit. The high-speed changing current passes through the coil to generate a high-speed magnetic field. When the magnetic field lines in the magnetic field pass through the crucible, numerous small eddy currents are generated inside the crucible, so that the crucible itself generates heat at a high speed, transfers heat to the copper alloy, and dissolves into a liquid. .




    Copyright© 2007-2013 songdao Electric furnace manufacturing Co,.Ltd All Rights Reserved
    Tel:18037961302 Sales hot line ( 24 hours service): 18037961302
    Adress: Luoxin Industrial Park, Luoyang, Henan